Zeolitic Imidazolate Framework 8‐Derived Au@ZnO for Efficient and Robust Photocatalytic Degradation of Tetracycline

Tetracycline (TC) and other antibiotics accumulated in groundwater and soil pollute ecological environment and threaten human health. Gold nanoparticles doped on photocatalysts are able to enhance the photodegradation efficiency during removing these antibiotics, but preparation of Au nanoparticles of well‐dispersion on photocatalysts remains challenging. In this work, zeolite imidazolate (ZIF‐8) was employed as the precursor to prepare Au@ZnO photocatalyst via impregnation and in‐situ reduction method to efficiently degrade the tetracycline in the aqueous solution. Au nanoparticles are of 10 nm in size and uniformly dispersed on the surfaces of ZnO microstructures. The as‐prepared Au@ZnO is able to remove 85.5% of TC of 0.010 mg/mL within 2 h, presenting higher photocatalytic activity than pure ZnO catalyst. Most importantly, the catalyst shows its superior stability after five cycles without structure and activity changing. The mechanism of the photocatalytic degradation was discussed in detail.     

Mechanistic Insights into the Synthesis of Fully Condensed Polyhedral Octaphenylsilsesquioxane

A comprehensive study on the efficient one‐pot synthesis of polyhedral octaphenylsilsesquioxane (OPS) is reported via the hydrolytic condensation of phenyltrimethoxysilane (PTMS) in the presence of basic catalyst to investigate the specific synthesis mechanism. The synthetic reactions are monitored with real time infrared (RTIR) spectroscopy. Then RTIR coupled with ²⁹Si nuclear magnetic resonance spectroscopy (NMR) and matrix‐assisted laser desorption/ionization time of flight mass spectrometry (MALDI‐TOF‐MS) are used to monitor the reactions and identify the intermediary species during the reaction. The rapid hydrolysis of PTMS is detected by RTIR. Contrary to previous reports, the ladder‐like structured species are identified as intermediates during the reaction process. It is suggested that formation of caged T₈ OPS is realized through the chain break and rearrangement of the ladder‐like phenyltrimethoxysilanes. Accordingly, a scheme from hydrolysis of the PTMS to formation of the OPS is provided.     

新郑西亚斯东周玉器材料属性与加工工艺的科技分析

中国玉文化源远流长，治玉工艺经过各个时代的不断发展和完善，在一定程度上能反映古代社会生产力发展水平及文化、贸易、技术交流等信息。利用能量色散型X射线荧光光谱（EDXRF）、激光拉曼光谱（LRS）、超景深光学显微系统（OM）等分析技术，结合硅胶覆膜微痕复制技术，对河南省新郑西亚斯东周墓地出土的一批玉器进行科技分析。首先利用化学成分和物相结构分析技术确定了玉器材质的矿物属性，其次利用显微分析技术表征了玉器表面及穿孔内部和印模的加工痕迹，特别是阴刻纹饰和穿孔微痕特征，最后探讨了玉器样品的材料属性和加工工艺两者之间的联系。化学成分和物相结构分析结果表明，所分析的西亚斯东周玉器材质丰富，主要矿物组成有滑石、透闪石、水晶、云母等。玉器表面纹饰微痕特征分析表明，所分析玉器阴刻工艺采用了两种加工工具，分别是砣具和手持硬质工具。穿孔微痕分析特征表明，钻孔包括单面钻孔和双面/多面钻孔两种方式，钻孔工艺则有实心钻、管钻等。部分玉器钻孔形状和内部微痕特征表明，尽管均采用了实心钻工艺，但所采用的实心钻头在形状上存在差异，同时，也存在是否配合解玉砂进行钻孔的差异。不同材料属性的玉器采用了不同的加工工艺。滑石质玉器，莫氏硬度1，器型主要为玉片饰，其表面阴刻纹饰主要采用手持硬质工具进行刻画，钻孔主要采用了双面钻孔方式，并使用了实心钻头未添加解玉砂进行加工，钻头形状可能为圆锥状；云母质玉器，莫氏硬度2~3，器型主要为玉玦片饰，纹饰采用了砣具添加解玉砂的加工工艺，钻孔方式为单面钻孔，采用了管钻工艺。透闪石型玉器，莫氏硬度5~6，器型主要为玉片饰，表面纹饰采用砣具配合解玉砂砣刻，以双面钻孔的方式为主，钻孔工艺为实心钻头配合解玉砂工艺，钻头形状与滑石类样品一致，为圆锥状。水晶质玉器，莫氏硬度7，均为珠饰，表面无纹饰，钻孔方式为双面/多面钻孔，钻孔工艺为实心钻配合解玉砂工艺，且钻头可能为圆柱形。研究结果表明，玉器表面纹饰所采用的阴刻工艺和钻孔工艺，与玉器本身的材料属性、器型等存在密切关系。     

Antibacterial triterpenoids from the leaves of Ilex hainanensis Merr.

One new triterpenoid (1) and seven known analogues (2–8) were isolated from the leaves of Ilex hainanensis Merr.. Their structures were established by analysis of their MS, 1D and 2D NMR spectroscopic data and comparison with those in the literature. The antibacterial activity of compounds 1–8 were evaluated by determination of minimum inhibitory concentration using twofold microdilution broth method against Streptococcus mutans ATCC 25175 (Gram-positive) and Fusobacterium nucleatum ATCC 10953 (Gram-negative). Compounds 3 and 5 showed significant antibacterial activity against S. mutans in concentration of 9.7 μg/mL, while showed little antibacterial activity against F. nucleatum. On the contrary, the inhibitory activity of compounds 1, 2 and 6 against F. nucleatum were higher than them against S. mutans.     

Confining analyte droplets on visible Si pillars for improving reproducibility and sensitivity of SALDI-TOF MS

Analytical and Bioanalytical Chemistry - We present a universal method to efficiently improve reproducibility and sensitivity of surface-assisted laser desorption/ionization time of flight mass...     

染料敏化太阳能电池载流子传输的数值模拟

由于在染料敏化太阳能电池(dye-sensitized solar cell, DSSC)中存在染料弛豫、半导体薄膜中电子与氧化态染料分子发生反应和电子在电解质中与氧化态离子复合等不利反应,利用一个更完善的DSSC载流子传输模型对电池的光电性能进行模拟就显得非常重要。为此,本文基于由多重俘获理论建立的DSSC中的包括电子、染料阳离子、碘化物和三碘化物在内的载流子传输模型,数值模拟得到了不同TiO₂薄膜厚度、不同入射光强度与不同染料分子吸收系数下DSSC的J-V曲线。结果表明,随着TiO₂薄膜厚度的增加,太阳能电池的短路电流密度增大,开路电压减小,光电转换效率先增大后减小。当DSSC的TiO₂薄膜厚度为20 μm时,光电转换效率达到最大值7.41%,同时光电转换效率随入射光强度与染料分子吸收系数的增大均有一定程度提高,其中在吸收系数为4 500 cm^-1时,光电转换效率为6.73%。以上结果可以为改进DSSC的光电性能提供理论指导。     

RIG型磁光薄膜的研究进展及应用

随着光通信技术与光子集成电路的发展,非互易性器件作为光通信系统中重要的组成部分得到了越来越广泛的研究与应用。基于磁光效应制成的磁光隔离器和环行器是目前应用最为广泛的非互易性器件,为了将非互易性器件整块集成在硅片上,需制备性能与块状磁光材料相当的磁光薄膜。在近红外通信波段(1 550 nm),以钇铁石榴石(Y₃Fe₅O₁₂,YIG)为代表的稀土铁石榴石(RIG)具备优良的磁光效应,是最具应用前景的磁光材料之一。研究发现,使用稀土离子对YIG薄膜进行掺杂可以有效改善其磁光性能,尤其是Bi³⁺和Ce³⁺掺杂的YIG表现出巨法拉第效应。本文首先介绍了法拉第效应原理,介绍了三种常见磁光薄膜的生长方法,回顾了近年来的主要研究成果,介绍了磁光薄膜在光隔离器和环行器中的应用,最后对磁光薄膜的未来发展趋势进行了展望。     

回转体头部通气入水流场演化与载荷特性数值预报研究

地下硐室作为爆炸危险物的隐蔽贮藏空间，有潜在的内爆炸风险。为研究内爆炸作用下硐室围岩的动态响应机制，提出了一种基于岩石HJC （Holmquist-Johnson-Cook）模型和节理内聚力单元的损伤-虚拟裂纹模型。分析了模拟方法的可靠性，并在此基础上，通过多物质ALE算法对球形硐室内爆炸过程进行数值模拟，分析了围岩损伤范围和分区破坏规律。研究表明：插入内聚力单元弥补了HJC模型无法模拟低静水压力下张拉破坏的不足，且尺寸效应易于处理。模拟方法同时考虑了岩体内张拉裂纹的扩展和岩石材料的塑性损伤，能够真实地反映岩石破坏的全过程。以红砂岩为例，根据数值模拟结果，填实（耦合装药）爆炸时围岩分区破坏规律明显，破碎区比例半径为0.26 m/kg^1/3、裂隙区比例半径为0.47 m/kg^1/3。随着硐室尺寸的增大，空气的间隔作用可以减小爆炸荷载对围岩的损伤作用，比例半径达到0.52 m/kg^1/3时，可以实现爆炸荷载的完全解耦。     

Laser-Synchrotron Facility of the National Research Centre “Kurchatov Institute”

Crystallography Reports - The laser-synchrotron facility (LSF) of the National Research Centre “Kurchatov Institute” (NRC KI) is a unique research complex that combines unprecedented...